Yeah, that is true. But the one on PCB1 only cuts power for the USB A ports. It does not act as power switch for the card to provide charging capability. To do that you need two of them on PCB3. One has 5v from the battery as input and the 5v ports of the eoma68 card as output, the other one has the 5v ports from the card as input and the output should be wired to the input of the usb otg charger ic (through a diode otherwise 12v would damage the card). If a usb otg cable is plugged in and the computing card switches the two complementary sy6280, power would go into the usb charger ic and charge the battery which also powers the rest of the system. Power from the system to the computing card would be off because the switch is open.
However, it won't charge from the card, if the 12v adapter is plugged in (because of the protection diode).
I will clarify this on the pcbs page but at the moment I don't have access to a PC.
Julius
On Feb 25, 2017, 12:07, at 12:07, Luke Kenneth Casson Leighton lkcl@lkcl.net wrote:
On Sat, Feb 25, 2017 at 10:18 AM, Internet internet@devpi.de wrote:
After thinking a while about it I would say the SY6280 is probably
the
simplest solution of all. However, for the required functionality you would need two of them to route the power accordingly (one switch for charging, one for powering the card)…
there's one already on PCB1.
l.
arm-netbook mailing list arm-netbook@lists.phcomp.co.uk http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook Send large attachments to arm-netbook@files.phcomp.co.uk