3 Apr
2017
3 Apr
'17
3:46 a.m.
On Mon, Apr 3, 2017 at 3:01 AM, Luke Kenneth Casson Leighton lkcl@lkcl.net wrote:
http://hands.com/~lkcl/eoma/kde_tablet/3dcase/microdesktop_6.png
top and bottom added: curved at the sides but not the front or back, due to the fascia plates being too close to the edges (and straight, so they could bend and thus potentially drop out if too close).
if they're too thick then the connectors won't fit.
have to think about the PCMCIA end because the card is flush with the PCB and so the plate (at 1.5mm) means the card is embedded 1.5mm in, making it difficult to get at and difficult to put in HDMI and OTG cables.
needs more thought.
l.