En 23 de septiembre de 2015 en 17:13:37, Luke Kenneth Casson Leighton (lkcl@lkcl.net) escrito:
On Wed, Sep 23, 2015 at 4:07 PM, GaCuest wrote:
En 23 de septiembre de 2015 en 16:55:18, Luke Kenneth Casson Leighton (lkcl@lkcl.net)
escrito:
On Wed, Sep 23, 2015 at 2:59 PM, GaCuest wrote:
I’m using AirMail. It has plain text editing, but not line-wrap. I will do that manually.
appreciated.
I updated the block diagram: http://rhombus-tech.net/community_ideas/games_console/news/pcb_block_diagram...
Anything more to change?
yes, one thing that's important: 1st USB is mandated to be >= speed than 2nd USB. so you need to swap 1st USB with 2nd USB.
reason: the STM32F is connected to the port that may end up being 480mbit/sec and the USB Hub is connected to the port that may end up being only 11mbit/sec.
certainly, for the jz4775 CPU Card (which i am sending off very shortly), it *DEFINITELY* has USB 2.0 for the 1st port and *ONLY* USB 1.1 for the 2nd.
and i am certainly not going to increase the cost of the jz4775 CPU Card by an extra $2 worth of components to put in a USB2 Hub when the SOC itself is only $2.50!!!
I think that you have not properly seen the block diagram.
wiggle wiggle follow the lines with my finger pointing at the screen this time... :)
The STM32 is connected to the second USB, the USB HUB is connected to the first USB.
This right?
yes! :)
Then, anything to change?
Is this right?: http://rhombus-tech.net/community_ideas/games_console/news/pcb_block_diagram...
arm-netbook mailing list arm-netbook@lists.phcomp.co.uk http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook Send large attachments to arm-netbook@files.phcomp.co.uk